Description

The 5kN Fibre Optic winch is used for pulling fibre optic cable by wrapping the cable directly onto a large diameter capstan. The capstan diameter is approx. 1400mm and is of suitable diameter not to damage the fibre optic cable during the pulling process. Fibre optic winches can be set up to a maximum line pull of 5kN. However, they can be adjusted via the control console to pull line force of anything less than 5kN and have a constant line pull throughout the pulling process. Sometimes these winches can be set e.g. to 2kN and locked in this maximum line pull mode to meet the requirements of specific cable companies such as Telstra and Optus. Redmond Gary can assist the purchase to obtain Telstra certification, if required.

Skid-mount winch assembly is supplied with operator controls on the side of the unit and a separate food-operated control for stop and forward/reverse of the wheel rotation. This design is a refinement of previous designs. After the unit has been set up a single operator can control the unit – this is a labour saving device.

Redmond Gary 5 / 10 / 20 kN Capstan Winch Line Pull Ratings

Rated Line Pull Capacity
2 kN
5 kN
10 kN
30 kN
    
Capstan Diameter
1300 mm
1300 mm
650 mm
200 mm
    
Max Line Speed
60 m/ min     
60 m/ min     
30 m/ min     
10 m/ min     
    
Pressure Compensator Setting
80 bar
210 bar
210 bar
210 bar